This product is a PCI Express bus-compliant interface board used to provide a digital signal I/O function on a PC. This product is compatible with the digital signal I/O with high voltage (input 12 - 48VDC, output 120VAC/DC) and features 16 opto-coupler isolated inputs (compatible with current sink output/current source output) and 16 semiconductor-relay outputs. You can use 16 input signals as interrupt inputs. In addition, the digital filter function to prevent wrong recognition of input signals is provided. Windows/Linux driver is bundled with this product. Possible to be used as a data recording device for LabVIEW, with dedicated libraries.
Certification
Environmental
RoHS Directive
Features
- This product has the 16 of opto-coupler isolated input (compatible with current sink output/current source output) whose response speed is 200μsec and 16 of semiconductor-relay output whose response speed is 1.0msec. Supporting driver voltages of 12 - 48VDC for input and 120VAC/DC for output with high voltage
- As the PCI Express bus (PC) is isolated from the input and output interfaces by opto-coupler and semiconductor-relay, this product has excellent noise performance.
- You can use 16 input signals as interrupt request signals and also disable or enable the interrupt in bit units and select the edge of the input signals, at which to generate an interrupt.
- Using the attached driver library API-PAC(W32) makes it possible to create applications of Windows/Linux. In addition, a diagnostic program by which the operations of hardware can be checked is provided.
- This product has a digital filter to prevent wrong recognition of input signals from carrying noise or a chattering. All input terminals can be added a digital filter, and the setting can be performed by software.
Specification
Digital I/O
Response speed Input:200µsec(max.)
Operation voltage Input: 12--24VDC
Operation voltage Input: 24--48VDC
Input circuit Opto-isolated input (Both sink/Sauce output)
Output circuit Semiconductor relay point-of-contact output
Options
Product Code |
Product |
ACX-PAC(W32) Ver.5.0 |
ActiveX components sets for measurement system development |
API-DIO(LNX) |
Linux版数字量I/O驱动程序 |
CM-32(PC)E |
Signal monitor Accessory for Digital I/O (Checkmate) |
CN5-D37M |
37pin D-SUB (Female) Connector Five-piece Set |
EPD-37 |
Screw Terminal (M3.5 x 37) |
EPD-37A |
Screw Terminal (M3 x 37) |
PCA37P-1.5 |
37pin D-type(M) to Open-Ended, Flat Cable(1.5m) |
PCA37P-3 |
37pin D-type(M) to Open-Ended, Flat Cable(3m) |
PCA37P-5 |
37pin D-type(M) to Open-Ended, Flat Cable(5m) |
PCA37PS-0.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m) |
PCA37PS-1.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m) |
PCA37PS-3P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 3m) |
PCA37PS-5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 5m) |
PCB37P-1.5 |
37pin D-type(M) at Each End, Flat Cable(1.5m) |
PCB37P-3 |
37pin D-type(M) at Each End, Flat Cable(3m) |
PCB37P-5 |
37pin D-type(M) at Each End, Flat Cable(5m) |
PCB37PS-0.5P |
37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost |
PCB37PS-1.5P |
37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost |
PCB37PS-3P |
37pin D-type(M) at Each End, Shield Cable(3m) Low Cost |
PCB37PS-5P |
37pin D-type(M) at Each End, Shield Cable(5m) Low Cost |
VI-DAQ |
LabVIEW用数据采集VI程序库 | |