This product is a PCI Express bus-compliant unisolated digital I/O board for input/output of digital signals (TTL level). Unisolated TTL level input 16ch and unisolated open collector output 16ch are provided, and all input signals can be used as interrupts. In addition, digital filter function to prevent wrong recognition of input signals is provided. With the driver libraries for Windows/Linux supplied as standard, applications with CONTEC hardware features fully utilized can be created. LabVIEW is supported with a plug-in of dedicated libraries.
Certification
Environmental
RoHS Directive
Features
- 16ch of unisolated TTL level input and 16ch of unisolated open-collector output with a response time of 200nsec. Output rating: max 30VDC, 40mA per pin.
- You can use all of the input signals as interrupt events and also disable or enable the interrupt in bit units and select the interrupt edge.
- This product has a digital filter to prevent input signals from carrying noise or a chattering. This product has a digital filter to prevent input signals from carrying noise or a chattering. All input channels can be added a digital filter, and the setting can be performed by software.
- Windows/Linux compatible driver libraries are attached: Bundled driver library API-PAC(W32) enables to create Window/Linux applications. In addition, a diagnostic program by which the operations of hardware can be checked is provided.
- The functions are same with PCI compatible board PIO-16/16T(PCI)H. In addition, as there is compatibility in terms of connector shape and pin assignments, it is easy to migrate from the existing system.
Specification
Digital I/O
Response speed 200nsec(max.)
Operation voltage Input: 5VDC-TTL
Operation voltage Output: 5VDC-TTL
Input circuit TTL level input (Negative logic)
Output circuit TTL open collector output (Negative logic)
Options
Product Code |
Product |
ACX-PAC(W32) Ver.5.0 |
ActiveX components sets for measurement system development |
API-DIO(98/PC) |
Windows版数字量I/O驱动程序 |
API-DIO(LNX) |
Linux版数字量I/O驱动程序 |
CM-32(PC)E |
Signal monitor Accessory for Digital I/O (Checkmate) |
CN5-D37M |
37pin D-SUB (Female) Connector Five-piece Set |
DIO-1616T-LPE |
PCI Express(Low profile)总线 非隔离数字量I/O接口板 |
EPD-37 |
Screw Terminal (M3.5 x 37) |
EPD-37A |
Screw Terminal (M3 x 37) |
PCA37P-1.5 |
37pin D-type(M) to Open-Ended, Flat Cable(1.5m) |
PCA37PS-0.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m) |
PCA37PS-1.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m) |
PCB37P-1.5 |
37pin D-type(M) at Each End, Flat Cable(1.5m) |
PCB37PS-0.5P |
37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost |
PCB37PS-1.5P |
37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost |
VI-DAQ |
LabVIEW用数据采集VI程序库 | |