This product is a PCI Express board used to provide a digital signal I/O function on a PC. This product features TTL level input 16ch, TTL level output 16ch opto-coupler isolated type with an internal 5VDC power supply that does not require external power. You can use all of the input signals as interrupt inputs. In addition, digital filter function to prevent wrong recognition of input signals is provided. Windows/Linux driver is bundled with this product. Possible to be used as a data recording device for LabVIEW, with dedicated libraries
Certification
Environmental
RoHS Directive
Features
- This product has the opto-coupler isolated TTL level input 16ch and output 16ch whose high speed response speed is 1µsec.
- Opto-coupler bus isolation: As the PCI Express bus (PC) is isolated from the input and output interfaces by opto-couplers, this product has excellent noise immunity.
- Power supply (5VDC 600mA) for driving opto-coupler is equipped. Whether or not to use the internal power supply can be specified by jumpers in blocks of 16ch.
- You can use all of the input signals as interrupt events and also disable or enable the interrupt in bit units and select the interrupt edge.
- This product has a digital filter to prevent input signals from carrying noise or a chattering. This product has a digital filter to prevent input signals from carrying noise or a chattering. All input channels can be added a digital filter, and the setting can be performed by software.
- Windows/Linux compatible driver libraries are attached: Bundled driver library API-PAC(W32) enables to create Window/Linux applications. In addition, a diagnostic program by which the operations of hardware can be checked is provided.
Specification
Digital I/O
Response speed 1µsec(max.)
Operation voltage Input: 5VDC-TTL
Operation voltage Output: 5VDC-TTL
Built-in power supply 5VDC
Input circuit Opto-isolated TTL level input (Negative logic)
Output circuit Opto-isolated TTL level output (Negative logic)
Options
Product Code |
Product |
ACX-PAC(W32) Ver.5.0 |
ActiveX components sets for measurement system development |
CM-32(PC)E |
Signal monitor Accessory for Digital I/O (Checkmate) |
CN5-D37M |
37pin D-SUB (Female) Connector Five-piece Set |
EPD-37 |
Screw Terminal (M3.5 x 37) |
EPD-37A |
Screw Terminal (M3 x 37) |
PCA37P-1.5 |
37pin D-type(M) to Open-Ended, Flat Cable(1.5m) |
PCA37P-3 |
37pin D-type(M) to Open-Ended, Flat Cable(3m) |
PCA37P-5 |
37pin D-type(M) to Open-Ended, Flat Cable(5m) |
PCA37PS-0.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m) |
PCA37PS-1.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m) |
PCA37PS-3P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 3m) |
PCA37PS-5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 5m) |
PCB37P-1.5 |
37pin D-type(M) at Each End, Flat Cable(1.5m) |
PCB37P-3 |
37pin D-type(M) at Each End, Flat Cable(3m) |
PCB37P-5 |
37pin D-type(M) at Each End, Flat Cable(5m) |
PCB37PS-0.5P |
37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost |
PCB37PS-1.5P |
37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost |
PCB37PS-3P |
37pin D-type(M) at Each End, Shield Cable(3m) Low Cost |
PCB37PS-5P |
37pin D-type(M) at Each End, Shield Cable(5m) Low Cost | |