This board is a PCI bus-compliant interface board for input/output of digital signals. The board is a reverse-common typed and insurated digital input/output board and can input and output digital signals at 12 - 24 VDC. PIO-16/16L(LPCI)H can input and output up to 16 channels. This product uses opto- coupler isolated input (ready to accept current source output signals) for input and opto- coupler isolated open-collector output (current source type) for output. With the Windows version, the Linux version driver (API-PAC(W32)).
Certification
CE
Environmental
RoHS Directive
Features
- A different external power supply can be used for each common pin as it is shared by 16 channels.
- The PCI bus (personal computer) and the I/O interface are isolated from each other by an opto-coupler, offering good noise immunity.
- You can use all of the input signals as interrupt inputs. You can also select the interrupt trigger edge of the input signal.
- The board has a digital filter feature to prevent noise or chatter from causing erroneous inputs.
- Up to 35VDC, 100mA per signal, max. output.
- Zener diode connected to output transistors for protection from surge voltage. Overcurrent protective device provided for every eight channels of output transistors.
Specification
Digital I/O
Response speed 200µsec(max.)
Operation voltage Input: 12--24VDC
Operation voltage Output: 12--24VDC
Input circuit Opto-isolated input (Sauce output)
Output circuit Opto-isolated output (Sauce type)
Options
Product Code |
Product |
ACX-PAC(W32) Ver.5.0 |
ActiveX components sets for measurement system development |
API-DIO(98/PC) |
Windows版数字量I/O驱动程序 |
API-DIO(LNX) |
Linux版数字量I/O驱动程序 |
CN5-D37M |
37pin D-SUB (Female) Connector Five-piece Set |
EPD-37 |
Screw Terminal (M3.5 x 37) |
EPD-37A |
Screw Terminal (M3 x 37) |
PCA37P-1.5 |
37pin D-type(M) to Open-Ended, Flat Cable(1.5m) |
PCA37P-3 |
37pin D-type(M) to Open-Ended, Flat Cable(3m) |
PCA37P-5 |
37pin D-type(M) to Open-Ended, Flat Cable(5m) |
PCA37PS-0.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m) |
PCA37PS-1.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m) |
PCA37PS-3P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 3m) |
PCA37PS-5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 5m) |
PCB37P-1.5 |
37pin D-type(M) at Each End, Flat Cable(1.5m) |
PCB37P-3 |
37pin D-type(M) at Each End, Flat Cable(3m) |
PCB37P-5 |
37pin D-type(M) at Each End, Flat Cable(5m) |
PCB37PS-0.5P |
37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost |
PCB37PS-1.5P |
37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost |
PCB37PS-3P |
37pin D-type(M) at Each End, Shield Cable(3m) Low Cost |
PCB37PS-5P |
37pin D-type(M) at Each End, Shield Cable(5m) Low Cost |
VI-DAQ |
LabVIEW用数据采集VI程序库 | |