This product is PC/AT which performs Opto-isolated TTL level input and output, and an interface board for the compatible machines. This board can be used being able to mount in the expansion slot or I/O extension unit of the main part of a personal computer, and can be outputted and inputted a maximum of 16 points on this one board. In addition, this board contains the power supply for driving an isolated circuit. In the case of light load, by supplying current to external load using a built-in power supply, even if it does not prepare a power supply outside, it can be used (however, 250mA Max.).
Certification
CE
Environmental
Features
- Noise-protection nature is improving by Opto-isolated input and output.
- Two groups and the digital signal of 16 points can be inputted by making eight points into one group.
- Two groups and the digital signal of 16 points can be outputted by making eight points into one group.
- Simultaneous assignment of a maximum of 2 levels can do two of 16 input signals as an interruption input.
- The power supply for a photo-coupler drive is built in, and a built-in power supply or an external power supply can be chosen.
Specification
Digital I/O
Response speed 1µsec(max.)
Operation voltage Input: 5VDC-TTL
Operation voltage Output: 5VDC-TTL
Built-in power supply 5VDC
Input circuit Opto-isolated TTL level input (Negative logic)
Output circuit Opto-isolated TTL driver output (Negative logic)
Options
Product Code |
Product |
ACX-PAC(W32) Ver.5.0 |
ActiveX components sets for measurement system development |
API-DIO(98/PC) |
Windows版数字量I/O驱动程序 |
API-PAC(W32) |
CD-ROM版 驱动程序库 |
CM-32(PC)E |
Signal monitor Accessory for Digital I/O (Checkmate) |
DTP-3A |
Screw Terminal (M3 x 37) |
DTP-4A |
Screw Terminal (M2.6 x 37) |
EPD-37 |
Screw Terminal (M3.5 x 37) |
EPD-37A |
Screw Terminal (M3 x 37) |
PCA37P-1.5 |
37pin D-type(M) to Open-Ended, Flat Cable(1.5m) |
PCA37P-3 |
37pin D-type(M) to Open-Ended, Flat Cable(3m) |
PCA37P-5 |
37pin D-type(M) to Open-Ended, Flat Cable(5m) |
PCA37PS-0.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m) |
PCA37PS-1.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m) |
PCA37PS-3P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 3m) |
PCA37PS-5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 5m) |
PCB37P-1.5 |
37pin D-type(M) at Each End, Flat Cable(1.5m) |
PCB37P-3 |
37pin D-type(M) at Each End, Flat Cable(3m) |
PCB37P-5 |
37pin D-type(M) at Each End, Flat Cable(5m) |
PCB37PS-0.5P |
37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost |
PCB37PS-1.5P |
37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost |
PCB37PS-3P |
37pin D-type(M) at Each End, Shield Cable(3m) Low Cost |
PCB37PS-5P |
37pin D-type(M) at Each End, Shield Cable(5m) Low Cost | |