PIO-16/16L(CB)H is a PC Card Standard compliant CardBus TYPE II size PC Card for input/output of digital signals. PIO-16/16L(CB)H can input and output digital signals at 12 to 24 VDC and can input and output up to 16 channels. With the Windows version, the Linux version driver (API-PAC(W32)). The signal assignment for the connector is compatible with the PIO-16/16L(PCI)H, PIO-16/16L(PCI), and PIO-16/16L(PM).
Certification
CE
Environmental
RoHS Directive
Features
- The PC card slot side (PC) and the I/O interface are isolated from each other by an opto-coupler, offering good noise immunity. The response time has been improved to 200µsec or better.
- A different external power supply can be used for each common pin as it is shared by 16 channels.
- You can use all of the input signals as interrupt inputs. You can also select the interrupt trigger edge of the input signal.
- The board has a digital filter feature to prevent noise or chatter from causing erroneous inputs.
- Up to 35VDC, 100mA per signal, max. output. Zener diode connected to output transistors for protection from surge voltage. Overcurrent protective device provided for every eight channels of output transistors.
- *: If your PC has a stack of two TYPE II PC Card slots, two PC Cards cannot be used simultaneously in both slots. The PC Card can be used along with another PC Card which does not use any external connector, such as a memory card.
Specification
Digital I/O
Response speed 200µsec(max.)
Operation voltage Input: 12--24VDC
Operation voltage Output: 12--24VDC
Input circuit Opto-isolated input (Sink output)
Output circuit Opto-isolated open collector output (Sink type)
Options
| Product Code |
Product |
| ACX-PAC(W32) Ver.5.0 |
ActiveX components sets for measurement system development |
| API-DIO(98/PC) |
Windows版数字量I/O驱动程序 |
| API-DIO(LNX) |
Linux版数字量I/O驱动程序 |
| CM-32(PC)E |
Signal monitor Accessory for Digital I/O (Checkmate) |
| CN5-D37M |
37pin D-SUB (Female) Connector Five-piece Set |
| DIO-1616LX-USB |
USB隔离型数字量I/O单元 |
| EPD-37 |
Screw Terminal (M3.5 x 37) |
| EPD-37A |
Screw Terminal (M3 x 37) |
| PCA37P-1.5 |
37pin D-type(M) to Open-Ended, Flat Cable(1.5m) |
| PCA37P-3 |
37pin D-type(M) to Open-Ended, Flat Cable(3m) |
| PCA37P-5 |
37pin D-type(M) to Open-Ended, Flat Cable(5m) |
| PCA37PS-0.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m) |
| PCA37PS-1.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m) |
| PCA37PS-3P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 3m) |
| PCA37PS-5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 5m) |
| PCB37P-1.5 |
37pin D-type(M) at Each End, Flat Cable(1.5m) |
| PCB37P-3 |
37pin D-type(M) at Each End, Flat Cable(3m) |
| PCB37P-5 |
37pin D-type(M) at Each End, Flat Cable(5m) |
| PCB37PS-0.5P |
37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost |
| PCB37PS-1.5P |
37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost |
| PCB37PS-3P |
37pin D-type(M) at Each End, Shield Cable(3m) Low Cost |
| PCB37PS-5P |
37pin D-type(M) at Each End, Shield Cable(5m) Low Cost |
| VI-DAQ |
LabVIEW用数据采集VI程序库 | |
产品详细介绍
当前位置：
