It is AIO terminal for USB2.0 where there are an analog voltage signal measurement, the voltage signal output easily by being connected to USB interface of a PC. It is possible for analog input (16bit, 8ch), analog output (16bit, 2ch), digital input (LVTTL 4 points), and digital output (LVTTL 4 points). Making windows application is possible by attached data logger software [C-LOGGER] to data collection non-programing, and Visual Basic or Visual C++ programing by an attached driver library.
Certification
Environmental
RoHS Directive
Features
- Equipped with the analog input (10uSec/ch, 16bit, 8ch), analog output (10uSec, 16bit, 2ch) and digital I/O (4ch each, LVTTL level). All adjustment to analog I/O can be performed by software. Troublesome jumper setup is not required. In addition, It can memorize the adjustment information that is different from adjustment information at the time of factory shipment and can have the adjustment information that accepted use environment.
- Compliant with USB2.0/USB1.1 specifications and capable of a high-speed transfer (480Mbps). Powered by the bus, enabling operation without an external power supply.
- Synchronized with an external signal and capable of starting, stopping the analog I/O.
- Internal buffer memory can be used in FIFO or RING mode (1kWord each for analog input and output).
- Easy-to-wire screw-type connector adopted.
- It be supported with in data logger software [C-LOGGER] that graph indication of collected the signal data, a file save, dynamic transfer to spreadsheetware Excel are possible. * 1: Just after PC start, as for the analog output voltage just after USB port connection, the minimum (-10V) of a setting range is output.
Specification
Analog I/O
Input channel Single end 8ch
A/D conversion speed 10µsec/ch(max.)
D/A conversion speed 10µsec(max.)
Digital I/O
Response speed 200nsec(max.)
Operation voltage Input: 3.3VDC-LVTTL
Operation voltage Input: 5VDC-TTL
Operation voltage Output: 3.3VDC-LVTTL
Input circuit LVTTL level input (Positive logic)
Output circuit LVTTL level output (Positive logic)
Options
Product Code |
Product |
ACX-PAC(W32) Ver.5.0 |
ActiveX components sets for measurement system development |
BRK-USB-Y |
Bracket for USB I/O Terminal products |
C-LOGGER |
Data Logger Software for Windows |
CN6-Y14 |
14 pin Terminal connector(screw type) 6/set |
ML-DAQ |
MATLAB用数据采集程序库 | |