It is Interface board of PCI bus conformity which inputs an analog signal, and to do conversion (AD conversion) for digital data. It puts a buffer memory of large-capacity 16M data on analog input department, and sampling it can perform a background in various trigger conditions. It is equipped with one point of analog output, T TL digital input and output for each 4 points. Attachment Drivers for Windows/Linux. In addition, can support data collection that using a data logger soft[C-LOGGER(Attachment)] and no programing, by plug in of an exclusive library (a free download) and can supports MATLAB and LabVIEW too.
Certification
CE
Environmental
RoHS
Features
- The highly precise 16bit analog-digital converter deployment, a sampling of 1 uSec/ch at the maximum are possible.
- Equipped with high-capacity buffer memory for 16MB of data and a variety of sampling control functions: FIFO or RING buffer memory for 16MB of data, allowing sampling to be performed as a background task independent of the processing power of the PC. Capable of starting and stopping sampling not only by software commands but depending on the strength of an analog signal (via conversion data comparison) or by detection of a TTL-level signal (external trigger).
- The input of 16 channels is possible(Eight differential input channels): The input of 16 channels the single-end input, or eight channels by the differential input is possible. In addition, It can sets the order of conversion channels. By option, Expansion (32 channels in total) of 16 channels is possible.
- Loading analog output, digital input and output: One point of analog output, and TTL digital nput and output for each 4
- It condenses tall high-performance to compact PCI shortstop size
- Abundant optional machinery: As for the buffer amplifier, the simultaneous sampling, the isolation electric current / thermocouple input, the low pass filter, the cable, Furthermore, It prepares a lot of options expanding a function.
Specification
Analog I/O
Input channel Single end 16ch (Differential 8ch)
A/D conversion speed 1μsec/ch(max.)
D/A conversion speed 10μsec/ch(max.)
Digital I/O
Response speed 200nsec(max.)
Operation voltage Input: 5VDC-TTL
Operation voltage Output: 5VDC-TTL
Input circuit TTL level input (Positive logic)
Output circuit TTL level output (Positive logic)
Page Top
Options
Product Code |
Product |
ACX-PAC(W32) Ver.5.0 |
ActiveX components sets for measurement system development |
API-AIO(LNX) |
Linux版模拟量I/O驱动程序 |
API-AIO(WDM) |
Windows版高性能模拟量I/O驱动程序 |
ATBA-16E |
Buffer Amplifier Function Extension Box for analog input board |
ATII-8C |
isolation function extension accessories |
ATLF-8A |
增益放大器功能扩展附件 |
ATP-16E |
BNC Connectors terminal box for Analog I/O Board |
ATSS-16A |
Simultaneous sampling function extension accessories |
ATUH-16A(PCI) |
16CH Extension Sub-board |
C-LOGGER |
Data Logger Software for Windows |
CN5-D37M |
37pin D-SUB (Female) Connector Five-piece Set |
DT/E1 |
16pin Header to Open-Ended for Analog E series Boards-1.5m |
DT/E2 |
16pin post header -> D-SUB 15pin with Bracket(10cm) |
DT-E3 |
16pin post header -> D-SUB 15pin Bracket with Cable(150mm) |
EPD-37A |
Screw Terminal (M3 x 37) |
FTP-15 |
Screw Terminal (M3 x 15) |
ML-DAQ |
MATLAB用数据采集程序库 |
PCA15P-1.5 |
15pin D-type(M) to Open-Ended, Flat Cable(1.5m) |
PCA37P-1.5 |
37pin D-type(M) to Open-Ended, Flat Cable(1.5m) |
PCA37PS-0.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m) |
PCA37PS-1.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m) |
PCB15P-1.5 |
15pin D-type(M) at Each-End, Flat Cable(1.5m) |
PCB37PS-0.5P |
37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost |
PCB37PS-1.5P |
37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost |
PCC16PS-1.5 |
Single End Coaxial Cable for 16ch Input(1.5m) |
PCC16PS-3 |
Single End Coaxial Cable for 16ch Input(3m) |
PCD8PS-1.5 |
2 wire Shield Cable for 8ch Differential Input (1.5m) |
PCD8PS-3 |
2 wire Shield Cable for 8ch Differential Input (3m) | |