This product is an unisolated PCI Express bus-compliant interface board that expands the I/O function of a PC for analog signals. This product carries high-capacity buffer memory for 16MB of data for analog input, allowing background sampling to be performed in a variety of trigger conditions. This product also has one analog output channel, four channels for TTL level digital input, and four channels for TTL level digital output. Analog input region is 16bit and conversion speed 1μsec/ch. Using specially designed accessories allows you to expand functions such as additional channels, simultaneous sampling and isolation amplifier. It is bundled with full-fledged software [C-LOGGER]. The product can also be used as a data recording device for MATLAB and LabVIEW, using dedicated libraries as plug-ins.
Certification
Environmental
RoHS Directive
Features
- This product is the high-speed/high-precision type that performs A-D conversion at a conversion speed of 1μsec/ch and a resolution of 16-bit. The product has analog input 16ch, analog output 1ch, digital input/output (TTL level: four each), and a counter (32-bit, TTL level 1ch). In addition, the analog input can be set to single-end input 16ch or differential input 8ch, while the counter is commonly used as the digital input/output.
- The analog input block contains mass-storage buffer memory (16M data) that can be used in the FIFO or RING format. This allows for background analog input that does not depend on the operation status of the software or PC.
- A number of accessories are available to expand the functions even further: a buffer amplifier, simultaneous sampling, isolation and current/thermocouple input, a low-pass filter, additional channels (+ 16ch), cables, etc.
- Using the bundled data logger software [C-LOGGER] allows you to display recorded signal data in graphs, perform zoom measurement, save files, and perform dynamic transfer of data to the spreadsheet software [Excel] without any special program. In addition, the product is bundled with the driver library API-PAC(W32) which can be used to create various Windows/Linux applications as well as a diagnostic program which can be used to check the hardware operation.
- As for the control of the sampling start, choice is possible from software, conversion data comparison, outside trigger (the timing of the control signal that input from the outside). Such as for the control of the sampling stop, the choice, As the sampling number of times end, conversion data comparison, outside trigger, the forced stop by the software, are possible. In a sampling period, you can choose it among an internal clock (a highly precise timer put on a board), an outside clock (the control signal that input from the outside).
Specification
Analog I/O
Input channel Single end 16ch (Differential 8ch)
A/D conversion speed 1µsec/ch(max.)
D/A conversion speed 10µsec/ch(max.)
Page Top
Options
Product Code |
Product |
ACX-PAC(W32) Ver.5.0 |
ActiveX components sets for measurement system development |
AIO-121601E3-PE |
PCI Express总线 100KSPS 12位模拟量I/O接口板 |
AIO-121601UE3-PE |
PCI Express总线 1MSPS 12位模拟量I/O接口板 |
AIO-161601E3-PE |
PCI Express总线 100KSPS 16位模拟量I/O接口板 |
API-AIO(98/PC) |
Windows版模拟量I/O驱动程序 |
API-AIO(LNX) |
Linux版模拟量I/O驱动程序 |
API-AIO(WDM) |
Windows版高性能模拟量I/O驱动程序 |
ATBA-16E |
Buffer Amplifier Function Extension Box for analog input board |
ATII-8C |
isolation function extension accessories |
ATLF-8A |
增益放大器功能扩展附件 |
ATP-16E |
BNC Connectors terminal box for Analog I/O Board |
ATSS-16A |
Simultaneous sampling function extension accessories |
ATUH-16A(PCI) |
16CH Extension Sub-board |
C-LOGGER |
Data Logger Software for Windows |
CN5-D37M |
37pin D-SUB (Female) Connector Five-piece Set |
DT/E1 |
16pin Header to Open-Ended for Analog E series Boards-1.5m |
DT/E2 |
16pin post header -> D-SUB 15pin with Bracket(10cm) |
DT-E3 |
16pin post header -> D-SUB 15pin Bracket with Cable(150mm) |
EPD-37 |
Screw Terminal (M3.5 x 37) |
EPD-37A |
Screw Terminal (M3 x 37) |
FTP-15 |
Screw Terminal (M3 x 15) |
ML-DAQ |
MATLAB用数据采集程序库 |
PCA15P-1.5 |
15pin D-type(M) to Open-Ended, Flat Cable(1.5m) |
PCA37P-1.5 |
37pin D-type(M) to Open-Ended, Flat Cable(1.5m) |
PCA37PS-0.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m) |
PCA37PS-1.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m) |
PCB15P-1.5 |
15pin D-type(M) at Each-End, Flat Cable(1.5m) |
PCB37P-1.5 |
37pin D-type(M) at Each End, Flat Cable(1.5m) |
PCB37PS-0.5P |
37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost |
PCB37PS-1.5P |
37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost |
PCC16PS-1.5 |
Single End Coaxial Cable for 16ch Input(1.5m) |
PCC16PS-3 |
Single End Coaxial Cable for 16ch Input(3m) |
PCD8PS-1.5 |
2 wire Shield Cable for 8ch Differential Input (1.5m) |
PCD8PS-3 |
2 wire Shield Cable for 8ch Differential Input (3m) |
VI-DAQ |
LabVIEW用数据采集VI程序库 | |