It is multi-function PC Card for CardBus equipped with highly precise AIO, digital input and output, a counter function. It is equipped with a hardware event controller that unify control signals to manage, and the Bus master transfer function which high speed forwards large-capacity data, The PC measurement control system which is high speed / high precision is realized. Drivers attachment for Windows/Linux. In addition, a data logger is soft[C-LOGGER(Attachment)] is program that It usedless data collection, plug in of an exclusive library (a free download) and supports MATLAB and LabVIEW.
Certification
CE
Environmental
Lead-Free
Features
- Various sampling control with an event controller: As for analog input and analog output an outside clock signal synchronization whenever a counter value becomes the value that set analog input starts , It puts an event and the outside control signal input together freely and can perform control for the high synchronization that does not depend on software.
- It can realize a similar system with a desktop PC, or a note PC. ADA16-32/2(PCI)F and ADA16-32/2(CB)F which are the analog F series possess a similar function. It can almost just move the system assets which it built with a desktop PC in a note PC system.
- In analog input and each analog output, When It does not perform Bus maste transfer, it is equipped with an available buffer memory. It can perform AIO in the background that does not depend on software and the movement situation of a PC.
- To an outside control signal, a digital input signal of AIO, a counter input signal, It possess the digital filter which can prevent chattering. In addition, adjustment of analog input and analog output is possible in software(a protectionreading program).
- Analog input and analog output can perform Bus master transfer individually or at the same time, Large-capacity data transmission is possible without hanging load to CPU. Other functions synchronize with a clock signal of analog input, too and can transfer at the same time.
- *: I cannot use a PC Card slot of TYPE II size in both slots in the case of the PC that 2 form a line lengthwise at two pieces of same time. It can use memory cards with the PC Card which do not use an outside connector for.
Specification
Analog I/O
Input channel Single end 32ch (Differential 16ch)
A/D conversion speed 2μsec/ch(max.)
D/A conversion speed 10μsec(max.)
Counter motor control
Counter response frequency 10MHz
Digital I/O
Response speed 200nsec(max.)
Operation voltage Input: 3.3VDC-LVTTL
Operation voltage Output: 3.3VDC-LVTTL
Input circuit LVTTL level input (Positive logic)
Output circuit LVTTL level output (Positive logic)
Page Top
Options
Product Code |
Product |
ADC-68M/96F |
CardBus 模拟量I/O卡用屏蔽线缆 |
API-AIO(LNX) |
Linux版模拟量I/O驱动程序 |
API-AIO(WDM) |
Windows版高性能模拟量I/O驱动程序 |
ATBA-32F |
Buffer Amplifier Function Extension Box for analog input board |
ATBA-8F |
Buffer Amplifier Function Extension Box for analog input board |
ATP-32F |
BNC Connectors for Analog I/O Board |
ATP-8 |
BNC Connector Accessory for Analog I/O Board |
BNC-B200 |
BNC cable(2m) |
C-LOGGER |
Data Logger Software for Windows |
DTP-64A |
Screw Terminal (M3 x 96) |
EPD-68A |
Screw Terminal (M3 x 68) |
EPD-96 |
Screw Terminal (M3.5 x 96) |
EPD-96A |
Screw Terminal (M3 x 96) |
ML-DAQ |
MATLAB用数据采集程序库 |
PCA68PS-0.5P |
68pin 0.8mm Pitch Connector to Open-Ended, Shield Cable(0.5m) |
PCA68PS-1.5P |
68pin 0.8mm Pitch Connector to Open-Ended, Shield Cable(1.5m) |
PCB96PS-0.5P |
Both sides with connector shield cable for 68 pin 0.8mm pitch connectors(0.5m) |
PCB96PS-0.5P |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 0.5m) |
PCB96PS-1.5P |
Both sides with connector shield cable for 68 pin 0.8mm pitch connectors(1.5m) |
PCB96PS-1.5P |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 1.5m) |
VI-DAQ |
LabVIEW用数据采集VI程序库 | |