This product is a Low Profile PCI Express bus-compliant interface board used to provide an analog signal output function on a PC. It is multifunction type with 16-bit analog output 8 channels, digital I/O and counter function. This product carries buffer memory for 1K of data, allowing sampling to be performed in a variety of trigger / clock conditions. Windows/Linux driver is bundled with this product. Possible to be used as a data recording device for MATLAB and LabVIEW, with dedicated libraries.
Certification
Environmental
RoHS Directive
Features
- has analog output (10uSec, 16-bit, 8 channels), analog output control signal (LVTTL level 3 channels), digital I/O (each 4 channels for LVTTL level), counter (32-bit, LVTTL level 1 channel).
- You can select from software, an external trigger to control the start of sampling. You can select from completion of sampling for a specified number of sessions, an external trigger or software to control forcibly the end of sampling. The sampling cycle can be selected from the internal clock or an external clock.
- To adjust output voltage of all channels to 0V when the power supply is turned on can lower the unstable voltage and prevent the device connected from fault and malfunctioning when the D/A converter starts.
- The block contains buffer memory (1K data) that can be used in the FIFO or RING format. This allows for background analog output that does not depend on the operation status of the software or PC.
- A digital filter is included to prevent misdetection due to chattering on the control signal (external trigger input signal, sampling clock input signal, etc.), digital input signal and counter input signal(except from external clock input signal and couter gate signal).
Specification
Analog I/O
D/A conversion speed 10µsec(max.)
Counter motor control
Counter response frequency 10MHz
Digital I/O
Bus PCI Express [LowProfile]
Response speed 200nsec(max.)
Operation voltage Input: 3.3VDC-LVTTL
Operation voltage Output: 3.3VDC-LVTTL
Input circuit LVTTL level input (Positive logic)
Output circuit LVTTL level output (Positive logic)
Page Top
Options
Product Code |
Product |
ACX-PAC(W32) Ver.5.0 |
ActiveX components sets for measurement system development |
API-AIO(LNX) |
Linux版模拟量I/O驱动程序 |
API-AIO(WDM) |
Windows版高性能模拟量I/O驱动程序 |
EPD-50A |
Screw Terminal (M3 x 50) |
ML-DAQ |
MATLAB用数据采集程序库 |
PCA50PS-0.5P |
50pin miniature ribbon connector to Open-Ended, Shield Cable (Mold type, 0.5m) |
PCA50PS-1.5P |
50pin miniature ribbon connector to Open-Ended, Shield Cable (Mold type, 1.5m) |
PCB50PS-0.5P |
50pin miniature ribbon connector, Shield Cable (Mold type, 0.5m) |
PCB50PS-1.5P |
50pin miniature ribbon connector, Shield Cable (Mold type, 1.5m) |
VI-DAQ |
LabVIEW用数据采集VI程序库 | |