It is an interface board for PCI Express bus conformity. it can count a pulse signal from an outside device input. 32 bits up/down counter has 4 channel. It is connected to a rotary encoder, a linear scale and can use it. Input interface of a pulse signal is the Non-isolated LVTTL level input that can input a high-speed pulse signal. The high-speed data transmission between A board and PCs are possible by bus master transfer. Attachment Windows version driver(API-PAC(W32)).
Certification
Environmental
RoHS Directive
Features
- 32 bits up/down counter(which the input of two-phase signal and single-phase alternating current signal is possible) 4 channels are equipped, The pulse signal input(a non-isolation LVTTL level)to 10MHz at the maximum is possibility; (as for the smallest phase difference that can distinguish two-phase input 25nsec).
- It can converted into differential input interface by using differential unit [CTP-4D] and connection cable [CNT-68M/50M] sold separately.
- It puts one point of control signal for each channel (counter start/ stop and pre-sets).
- It can sample a count value in sampling rate of 20MHz at the maximum. In addition, high-speed data transmission between a board and PCs are possible without hanging load to CPU by Bus master teansfer function.
- In according with the arbitrary value that a count value set, Outbreak of interrupt, the output of an outside signal, pre-set and zero clear of a count value are possible.
- It is equipped with the function that is similar to CNT32-4MT(LPCI) for PCI and to CNT32-4MT(CB) for CardBus. Connector shape and connector signal placement are compatible with CNT32-4MT(LPCI) and CNT32-4MT(CB). In addition, it supports a Low Profile PCI slot or a standard PCI slot (change it with an attached bracket).
Specification
Counter motor control
Count method 32bit Up/Down
Counter response frequency 10MHz
Page Top
Options
Product Code |
Product |
ACX-PAC(W32) Ver.5.0 |
ActiveX components sets for measurement system development |
BX-100n-DC5000-C02 |
盒式工控机 BX100n 系列 配置Atom、DVI以及多信号I/O接口, 无风扇、无OS(CF) |
BX-100n-DC5311-C02 |
盒式工控机 BX100n 系列 配置无风扇Atom N270、DVI、I/O接口和WES2009(日文版/CF 2GB) |
CNT32-4MT(CB) |
CardBus 32位TTL高速升/降计数器卡 |
CNT32-4MT(LPCI) |
窄卡PCI总线 32位4通道TTL高速升/降计数器板 |
CNT-68M/50M |
CardBus 计数其输入卡用屏蔽线缆 |
CTP-4D |
Termination Panel with Differential Receivers for Counter Input |
EPD-50A |
Screw Terminal (M3 x 50) |
EPD-68A |
Screw Terminal (M3 x 68) |
PCA68PS-0.5P |
68pin 0.8mm Pitch Connector to Open-Ended, Shield Cable(0.5m) |
PCA68PS-1.5P |
68pin 0.8mm Pitch Connector to Open-Ended, Shield Cable(1.5m) |
PCB96PS-0.5P |
Both sides with connector shield cable for 68 pin 0.8mm pitch connectors(0.5m) |
PCB96PS-0.5P |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 0.5m) |
PCB96PS-1.5P |
Both sides with connector shield cable for 68 pin 0.8mm pitch connectors(1.5m) |
PCB96PS-1.5P |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 1.5m) |
Page Top
|