SMC-4P(PCI) is the control board which performs positioning of a stepping motor (pulse sequence input system) and a servo motor. The candidate for control of a controller is the motor driver unit offered from each motor maker company. The driver for dealing with the abundant functions of a motion control board simply from Windows is also prepared. You can use for a broad use like semiconductor fabrication machines and equipment, inspection equipment, a multi-axis robot, or a X-Y robot.
Certification
CE
Environmental
Lead reduction
Features
- An setup is early possible more: I am preparing the various Windows version utilities which shorten time to spend on an environmental setup. A board can be set up easily in the initial value setting utility of wizard form. Wiring can be checked easily in a diagnostic utility.
- It can be dealt with more easily: A setup on a board is altogether performed by software except for an identification number. About wiring, I am preparing the exclusive terminal stand (option) which thought the ease of using as important.
- I can use for a broader use: According to a visitor's use, you can use it broadly from easy inspection equipment to complicated robot control. About an used motor, you can use a stepping motor and a servo motor (pulse sequence input system).
- More nearly high-speed positioning control can be performed: It can be made to memorize a maximum of 1000 frames, being able to use information required for one positioning of speed, a acceleration and deceleration rate, a target position, etc. as one fra
- Many axes are more controllable: Synchronous control of many axes (a maximum of 64 axes) is possible. As synchronous control, group simultaneous start control, group simultaneous stop control, multi-axis continuation PTP control, and control between straight line assistant are possible. By this function, a visitor's multi-axis system can be operated more correctly and at high speed.
- More exact starting point return operation can be performed: An error may arise from positive in a starting point return stop position in the case where a starting point limit is detected, and the case where it detects from negative. With this board, sinc
Specification
Counter motor control
Motor speed range 0.1 -- 1Mpps
Count method 28bit Up/Down
Counter response frequency 1MHz
Page Top
Options
Product Code |
Product |
API-SMC(98/PC) |
Windows版运动控制驱动程序 |
CCB-SMC1 |
SMC-2P(PCI)/SMC-4P(PCI)用端子板 |
CN5-H96F |
96 pin half pitch connectors(A female) Five-piece Set |
PCA96P-1.5 |
A one end connector flat cable for 96 pin Half-Pitch connectors with(1.5m) |
PCA96P-3 |
A one end connector flat cable for 96 pin Half-Pitch connectors with(3m) |
PCA96P-5 |
A one end connector flat cable for 96 pin Half-Pitch connectors with(5m) |
PCA96PS-0.5P |
A one end connector shield cable for 96 pin Half-Pitch connectors with(Mold type, 0.5m) |
PCA96PS-1.5P |
A one end connector shield cable for 96 pin Half-Pitch connectors with(Mold type, 1.5m) |
PCA96PS-3P |
A one end connector shield cable for 96 pin Half-Pitch connectors with(Mold type, 3m) |
PCA96PS-5P |
A one end connector shield cable for 96 pin Half-Pitch connectors with(Mold type, 5m) |
PCB96P-1.5 |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 0.5m) |
PCB96P-3 |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 3m) |
PCB96P-5 |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 5m) |
PCB96PS-0.5P |
Both sides with connector shield cable for 68 pin 0.8mm pitch connectors(0.5m) |
PCB96PS-0.5P |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 0.5m) |
PCB96PS-1.5P |
Both sides with connector shield cable for 68 pin 0.8mm pitch connectors(1.5m) |
PCB96PS-1.5P |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 1.5m) |
PCB96PS-3P |
Both sides with connector shield cable for 68 pin 0.8mm pitch connectors(03m) |
PCB96PS-3P |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 3m) |
PCB96PS-5P |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 5m) | |